ماكينة اللياسة الكهربائية للجدران
Electric Plaster Machine
2009 MACE contracting Est. For Concrete Cutting Service  جميع الحقوق محفوظة
Mortar Pressure Plastering & Materials Machine
ماكينات اللياسة ورش المواد
Mortar Pressure Machine
Plaster & Spraying - Wet
مكينة لرش مواد اللياسة والجبص
Installation method
سهولة تركيب المكينة
saving time & Labors . . Up to 750m2/day
تنفيذ اكثر من سبعمائة متر مربع باليوم
accomplishment up to 90m2/Hour
متر مربع بالساعة90ضغط حتى
Max. conveying dist 30-50M
رش المواد من15-50متر  
Mortar Spraying Machine
مكينة خلط ورش المواد
This Machine can mix dry sand, cement
firstly, then spray Automatically
هذه المكينة يتم اضافة المواد الجافة وهي تقوم بالخلط والرش اوتوماتيكيا
Gun for Mortar Texture Sprayer ,
Ceilings and Walls, plaster, mortar
مسدس لرش الجدران والاسقف بضغط الهواء
للياسة - التكتشر - الجبص - المعجون
Wall Automatic Mortar Pressure Plastering Machine
مكينة رش مواد الجدران والارضيات الاوتوماتيكية
الاستخدامات Application
Can spray putty, diatom
mud, K11, 911, penetration
crystallization,
polyurethane, JS, cement
and asphalt waterproofing
coating materials,
continuous and stable, no
impulse.
الاسفلت - يوريثينالبولي اسمنت
العازلة - الجدران مواد - طرطشة
نالموادالديكورمعجوالموادعلى رش
لياسة - -  -   -
Counter
مكينة لياسة ضغط متطورة المانية الصنع
high quality plaster machine - Germany
Shotcrete Machine
مكينات رش الخرسانة والمواد
Electric Power
Diesel Motor
Shotcrete ,building, mines and slopes ,
this machine has been designed
especially for fibre spraying
Machine is a universal concrete spraying
machine for the processing of wet or dry mix.
Application scope الاستخدامات
رش وضخ الخرسانة والالياف والرمل والمواد
تعمل على ضخ ورش المواد الجافة والرطبة
Introduction Of Wet Mix
Plaster Machine
Wet Mix Plaster Machine
for Wall is suitable for
pumping and spraying the
wet ready mixed mortar
which is pumpable, such
as cement mortars, lime
plasters, gypsum
plasters,, masonry
mortars, insulating
plasters, self-leveling floor
screeds etc.
الاستخدامات Application
مناسبة لضخ المواد الرطبة - مواد اللياسة
(القصارة - المحارة) الجبس والمواد
اللاصقة ومواد العزل
Manual التشغيل
رش المواد حتى30متر
Max. conveying dist 30M
Full Automatic with Remote control
فل اوتوماتيك تعمل بالريموت كونترول
For all mortars, such as: job site mortars,
masonry/light masonry mortar, reinforced
mortars, cement renders, bonding
mortars, self-leveling floor screeds, ...
and many more.
Application fields
Introduction
ME-N5 is a high-efficiency and continuously mixing,
pumping and spraying machine for all types of
ready-mix dry mortars based on gypsum, lime and
cement. It is widely used around the world especially
in the developed countries. Thanks to the advantages
of the small volume, light weight, high efficient, low
noise and easy moving, the machine is working
reliable and with excellent performance.

It mixes all machine-applied factory premixed dry
mortars homogenously by getting required water and
mortars automatically. It can be loaded either bagged
or silo mortars.

It is a user-friendly machine that can be operated
easily through its well-designed control panel. It
contains all needed parts to work on site without any
problems.
Application fields
For all pumpable factory-premixed dry
mortars, such as: gypsum plasters, exterior
plasters, masonry mortars, injection mortars,
insulating mortars, bonding mortars,
self-leveling floor screeds, ... and many more.
Mortar Spraying Ready-Mix Machine
مكينة رش المواد الجاهزة المطورة
Dray System
نظام خلط الجاف
Introduction
ME-N5 is a high-efficiency and continuously pumping
spray machine for the ready-mix wet plaster and
render application of the mortars based on gypsum
and cement, especially for high conveying capacities
to higher floor
Application fields
For all pumpable gypsum and cement based
premixed wet mortars, such as: floor screed
mortars, semi-self leveling floor componds,
scratch coat render, insulating render,
masonry mortars, light masonry mortars,
bonding mortars, tiling and jointing mortars,
... and many more.
Wet System
نظام خلط رطب
Wet System
نظام خلط رطب
vibratory floor finishing
مكينة تشطيب الصبيات الخرسانية
Introduction
A. Suitable for flat cement and concrete surface during
construction building site androad  construction and
so on.

B. High speed and efficiency,easy for take.Strickling
and vibrating finish together.

C. Operator can adjust the impact force at any
moment, manual accelerograph controls vibrating  
frequency.

D. Concrete surface after vibration,no need to sprinkle
dry cement when press polish.   It reduce the
construction cost and repair frequency greatly.

E. Can avoid situation as concrete surface empty,knob
and split completely which usually appear after
concrete surface constructing. Finish the firmly,solid
and close-graind concrete surface.
المقدمــــة
مناسبة للتشطيب المثالي للاسطح المسطحة الخرسانية
سرعة عالية وكفائة  وسهولة العمل
الاهتزاز يقي من التشققات اللاحقة في الاسطح كما ان الاهتزاز يطال
كامل الاجزاء بنفس الوقت
التحكم في ضبط قوة الاهتزاز
الاهتزاز للمكينة لا داعي عمل رش الاسمنت الجاف بعد ذلك مما
يعني تكلفة اقل وتوفير الوقت والعمالة
المسطرة تخفيض تكلفة العمالة والسرعة في الانجاز بسبب طول
الذي يصل الى اربعة أمتارباحتراف
Description
ME-GMP piston mortar pump is a piston pump with
one single cylinder & single acting, mainly was
designed for conveying and spraying mortar or plaster.
This pump has compact structure, reliable operation,
low failure rate, convenient cleaning, easy
maintenance and high pumping pressure etc.
advantages, so it has widely been using for mortar
spraying, pumping and grouting in tunnel excavation
and maintenance, mine engineering, constructing
dams, bridges and foundation treatment etc. projects.
The pump also has been using for mortar and putty
pumping and spraying civil buildings
Application
This pump has compact structure, reliable operation,
low failure rate, convenient cleaning, easy
maintenance and high pumping pressure etc.
advantages, so it has widely been using for mortar
spraying, pumping and grouting in tunnel excavation
and maintenance, mine engineering, constructing
dams, bridges and foundation treatment etc. projects.
The pump also has been using for mortar and putty
pumping and spraying civil buildings
وحقن هيكل مدمج لتنظيف وصيانة سهلة . ضغط ورش المواد
جبص وجميع الانفاق والجسور ورش المواد الرطبة - لياسة - للياسة
المواد الرطبةمعجون -
الاستخدامات والتطبيق
Mortar Spray Pump
مكينة ضغط ورش المواد الرطبة
30 bar , Horizontal transport distance up to 80M
م80 بار توصيل المواد بضغط حتى 30ضغط
مكينات لياسة تعمل بالديزل
mortar cement spraying machine Diesel Engine
80L
150L
Electric 220v/380V or Diesel Type
Electric 380V Type Only