آلة ربط حديد التسليح وأهواز الكهرباء
ReBar Tier Machine
2009 MACE contracting Est. For Concrete Cutting Service  جميع الحقوق محفوظة
Quality USA
With Two Style
يعمل بنظامين
Change wire spool
تبديل السلك
Steel Fabrication Machine
مكينة تشكيل المعادن والحديد
Steel Hydraulic Cutter
For Steel and Scrap
مقص هيدروليكي للحديد والسكراب
Re-bar stirrup bender machine
مكينات ثني حديد التسليح الاوتوماتيكية
With Collector
مع الة تجميع الانتاج
Scissors for iron and scrap
مقصات للحديد والخردة
Hydraulic Scissors for Cars and Scrap
مقص هيدروليك للسيارات والخردة
Italy Re-bar bender machine 28mm
مكينة ثني حديد التسليح ايطالية مقاس28ملم
مقصات حديد تسليح ايطالية  حتى28ملم
Steel Re-bar cutter up to 28mm Italy
Re-bar bender machine up 32mm
مكينة ثني حديد تسليح حتى اثنان وثلاثون ملم
Re-bar stirrup bender machine
مكينات ثني حديد التسليح الاوتوماتيكية
مكينة ذات جودة وسرعات عالية
High Speed & Quality
Develop No.2 Model 10 & 12 mm
Towing speed 60m/min
Max bending speed 800/sec
Capacity 2200 Pce/h
Made in China High quality
Pinza - Rotary Tying Tool
اداة ربط اسيام الحديد الدوارة
Q 6mm x 3200mm
Q 8mm x 3200mm
Q 10mm x 3200m
مكينة تسنين حديد التسليح
Rebar Forging Machine with CE
Certificate for 16mm - 40mm Rebars
Machine Reinforcing Bar Cold
Extrusion Press Machine / 16mm-40mm
Industrial Steel Bar Connectors Adding
Length Coupler and Machines 16mm -
40mm
Transition Screwed Locked Bolt Coupler
Splicing Coupler for Connecting Steel
Reinforcing Bars
Description:
Plain couplers is used to connect reinforcing bars of
the same size.  Couplers are easy to install and
achieve failure loads higher than 115% of the
characteristic yield strength of grade 500 reinforcing
bar. Neither bar end preparation to form threads, nor
bar rotation are required.
couplers can also be used to join imperial, plain round
or deformed reinforcingbars. The bar ends are
supported within the coupler by two serrated saddles,
and as the lockshear bolts are tightened, the conical
ends embed themselves into the bar. As this happens
the serrated saddles bite into both the bar and the
shell of the coupler. The lockshear bolts of couplers up
to and including the 20mm can be tightened using a
ratchet wrench. For larger couplers a nut runner is
recommended.
In all cases heavy duty sockets should be used. When
the pre-determined tightening torque for the bolts is
reached, the heads shear off leaving the top of the
installed bolt slightly proud of the coupler. This
provides an instant visual check of correct installation.
Roller
مرفقات مع المكينة
Cutting blade
Worktable 3200mm
Cutting size 2.44
Max Cutting Depth 6mm
Carbon steel sheet
CNC ( Computer Numerical Control )
Worktable 3200mm
Max Cutting Depth 6-10mm
Carbon steel sheet
Ornamental Bender
مكينة تشكيل المعادن والحديد
E21(CNC) Sys. using
E21(CNC) Sys. using
This is come two models
1- 160t/6000 Bending machine (E21) and
    description of system E21 and DA41
2- WC67K-160T/6000(E21)
Length 6000mm x 3mm thk.
E21(CNC) Sys. using DA-41 Model
DA-41 موديل مطور واكثر دقة